localtion: >> English >> Product center >> Drill Tools

Drill collar

Abstract
The drill collar is used between the drill pipe and the bit in the drill stem. It is used to put weight on the bit so that the bit can drill.
SFMC drill collars are made of AISI 4145H or 4145H modified alloy steel. Its bores are trepanned from one direction with no mismatch. All drill collars are Q&T overall length.
SFMC manufactures not only slick Drill Collars, but also spiral Drill Collars with slip, elevator recesses and hardbanding upon client’s option. SFMC drill collars are available in lengths from 10 to 45 feet and outside diameter from 3-1/8" to 11".

SFMC also make high torque threads such as Double shoulder NC31,NC38,NC46,NC50 and 5-1/2”FH specified by clients
SFMC’s no-magnetic drill collars are made from chrome manganese low carbon austenitic alloy, which has following characteristic:
The chemical composition should be controlled strictly during the refining and forging process.

With excellent lower Magnetic permeability, high strength of mechanical properties and outstanding resistant to stress corrosion cracking and no tendency to galling.
 

Material Traceability Rigid Inspection Procedures Manufacturing Specification of drill collar Slips and elevators recesses
Spiral drill collar Drill collar with a size and type of wear-resistant Maintenance
Manufacturing process    

Copyright: Shanxi Fenglei Drilling Tools Co., Ltd ©2009-2010
Technical Assistance: Haishuo Technical Co., Ltd
ICP:06001348